Welcome to the world of smart home

0
Model No: BMENOR2200H

Schneider BMENOR2200H Communication module, Modicon M580, IEC 60870-5-101/104, DNP3, for severe environments

Part number : BMENOR2200H Communication module, Modicon M580, IEC 60870-5-101/104, DNP3, for severe environments
Faster quote : saleszxtech@163.com
minimum order :
1 piece
Supply Ability :
1000piece / Day
Stock Time :
2-3Day
Quantity :
add to cart
Contact Now

Specifications

Main
Range of productModicon X80
Product or component typeCommunication module
Product compatibilityBMEXBP... - Ethernet + X-bus rack

Complementary
Integrated connection type1 RS232, connector type: RJ45, transmission rate: 115200 bit/s, transmission mode: 8 wires
1 RS485, connector type: RJ45, transmission rate: 115200 bit/s, transmission mode: 1 twisted shielded pair
1 Ethernet, transmission rate: 100 Mbit/s, transmission mode: Ethernet backplane
Communication serviceDNP3 NET server SAv2/SAv5 with pre-shared key
DNP3 NET client SAv2/SAv5 with pre-shared key
IEC 60870-5-101 server/client
IEC 60870-5-104 server/client
Modbus TCP messaging
Web server (HTTPS), HTML5
FDR client
SNTP client
SNMP agent
Time stamped events management
Automatic events backup on power loss
Transparent events routing from remote servers to SCADA
Data logging service
CybersecurityRole-based access control
System hardening
Secure communiction (HTTPS)
Achilles certified
Syslog protocol support
Transport Layer Security for RTU protocols
SNMP logging
Certificate based authentication
Memory descriptionSupport flash SD memory card (BMXRMS004GPF) 4 GB
SupplyInternal power supply via rack
Protective treatmentConformal coating
Dielectric strength1500 V DC for 1 min, between Serial port and bus/earth
Shock resistance30 gn
Current consumption110 mA at 24 V DC
Length86 mm
Width32 mm
Height131 mm
Product weight0.38 kg
Environment
Ambient air temperature for storage-40…85 °C
Ambient air temperature for operation-25…70 °C
Relative humidity5…95 % at 55 °C
IP degree of protectionIP20
Directives2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
2014/34/EU - ATEX directive
Product certificationsCE
UL
CSA
RCM
EAC
Merchant Navy
ATEX zone 2/22
IECEx zone 2/22
Safety certification non interfering type 1
UKCA
StandardsEN/IEC 61131-2
EN/IEC 61010-2-201
UL 61010-2-201
CSA C22.2 No 61010-2-201
IACS E10
EN/IEC 61000-6-5, interface type 1 and type 2
EN/IEC 61850-3, location G
EN/IEC 60079-0
Environmental characteristicGas resistant class Gx conforming to ISA S71.04
Gas resistant class 3C4 conforming to IEC 60721-3-3
Dust resistant class 3S4 conforming to IEC 60721-3-3
Sand resistant class 3S4 conforming to IEC 60721-3-3
Salt resistant level 2 conforming to IEC 68252
Mold growth resistant class 3B2 conforming to IEC 60721-3-3
Fungal spore resistant class 3B2 conforming to IEC 60721-3-3
Hazardous location class I division 2
Operating altitude0...2000 m
2000 m...5000 m with derating factor
Vibration resistance3 gn
Local signalling1 LED (green/red) for cyber security (SEC)
1 LED (yellow) for serial communication (SER COM)
1 LED (red) for download in progress (DL)
1 LED (red) for processor or system fault (ERR)
1 LED (red) for memory card fault (CARD ERR)
1 LED (green/red) for status of Ethernet network (ETH STS)
1 LED (green) for processor running (RUN)

Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height8.6 cm
Package 1 Width3.2 cm
Package 1 Length13.1 cm
Package 1 Weight522.0 g

Description

This communication module is part of the Modicon M580 range, an offer of Programmable Automation Controllers (PAC) and safety Programmable Logic Controllers (PLC) with built-in Ethernet. This communication module enables M580 platform to use RTU protocol exchange with RTU stations. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C/-13°F to 158°F. This module can help hybrid manufacturers to achieve better, measurable, earlier ROI and Up to 100% returns on their project investments in less than three months. It supports up to 64 RTU devices when module acts as Client/Master. It complies with M580 Hot Standby system. The module dimensions are 32x86x131mm, and it weighs 0.38kg. This product meets the needs of our customers from Smart Infrastructure, Water and Waste Water, Consumer Packaged Goods, Mining Minerals Metals, Data centers and Power generation. It complies with RTU protocols including DNP3 (NET & Serial), IEC60870-5-101/104. It must be installed on a BMEXBPxxx - Ethernet + X-bus rack The module is delivered in 1 packing unit. It occupies one ethernet slot on the rack. This product can be used in combination with Modicon X80 (I/O, backplane, cable) and works with the EcoStruxure Control Expert programming software. Modicon M580 improves reliability and sustainability, as well as productivity with high performance and increases operating profitability due to efficient access to data.

Lead time: in stock

Warranty: 12 months

100% Payment in Advance
Courier partners: DHL, UPS, FedEx 

Packing & Delivery

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging.

Related parts :

CompactCom B30
DeviceNet™ B30 Brick  AB6381
Profibus DPV1 B30 Brick AB6380

EtherCAT B30 Brick AB6385

EtherNet/IP™ 2 Port B30 Brick AB6384
Modbus TCP 2 Port B30 Brick AB6383
PROFINET IO 2 Port B30 Brick AB6382

Anybus CompactCom M30 MODULE

Questions? Call/Whatsapp +86-18030186862 or email saleszxtech@163.com

We specialize in purchasing and selling quality pre-owned mechanical parts, PLCs, motors, panel views, electrical components and other industrial surplus inventory. We stock a wide variety of items ranging from small parts to complete machines. Whether you are interested in selling or buying, we make it our mission to help customers have a quick, hassle-free experience.