Schneider STBDDI3420K digital input kit, Modicon STB, standard, 24V DC, 4 I
Faster quote : saleszxtech@163.com
Specifications
| Range of product | Modicon STB distributed I/O solution |
|---|---|
| Product or component type | Standard digital input kit |
| kit composition | STBXTS2100, 6-terminal spring clamp connector STBDDI3420 module STBXTS1100, 6-terminal screw type connector STBXBA1000 base |
| Discrete input number | 4 |
| Discrete input voltage | 24 V |
| Discrete input voltage type | DC |
| Input voltage limits | 11...30 V at state 1 -3...5 V at state 0 |
|---|---|
| Permissible voltage | 30 V |
| Absolute maximum voltage | 56 V 1.3 ms |
| Discrete input current | 8 mA |
| Current state 0 guaranteed | <= 1.2 mA |
| current state 1 guaranteed | >= 2.5 mA |
| Discrete input logic | Positive or negative |
| Response time | 0.925 ms off-to-on 0.5 ms 1.35 ms on-to-off 0.5 ms |
| Protection type | Power protection integrated fuse on PDM time lag 10 A Input protection resistor-limited Reverse polarity protection |
| Insulation between channels and logic bus | 1500 V for 1 minute |
| Cold swapping | Yes |
| hot swapping | Yes for standard NIMs |
| Input filtering | 1 ms 2 ms 4 ms 8 ms 0.5 ms 16 ms +/- 0.25 ms |
| Current supplied by sensor | 100 mA per channel |
| Product compatibility | I/O base STBXBA1000 Power distribution module STBPDT3100/3105 |
| [Us] rated supply voltage | 24 V DC |
| Supply | Power distribution module |
| Current consumption | 45 mA at 5 V DC for logic bus |
| Marking | CE |
| Overvoltage category | II |
| Status LED | 1 LED (green) module status (RDY) 1 LED per channel (green) channel status (IN1 to IN4) 1 LED (red) module error (ERR) |
| Depth | 65.1 mm |
| Height | 18.4 mm |
| Width | 125 mm |
| Product weight | 0.111 kg |
| Standards | EN/IEC 61131-2type 1+ |
|---|---|
| Product certifications | CSA FM Class 1 Division 2 UL |
| Pollution degree | 2 conforming to IEC 60664-1 |
| Operating altitude | <= 2000 m |
| IP degree of protection | IP20 conforming to EN 61131-2 class 1 |
| Ambient air temperature for operation | -25…70 °C (without derating) |
| Ambient air temperature for operation | 32...140 °F without derating |
| Ambient air temperature for storage | -40…85 °C without derating |
| Ambient air temperature for storage | -40...185 °F without derating |
| Relative humidity | 95 % at 60 °C without condensation |
| Vibration resistance | 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail +/-0.35 mm at 10…58 Hz |
| Shock resistance | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 2.5 cm |
| Package 1 Width | 8.0 cm |
| Package 1 Length | 13.0 cm |
| Package 1 Weight | 131.0 g |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 28 |
| Package 2 Height | 15.0 cm |
| Package 2 Width | 30.0 cm |
| Package 2 Length | 40.0 cm |
| Package 2 Weight | 4.094 kg |
| Unit Type of Package 3 | PAL |
| Number of Units in Package 3 | 448 |
| Package 3 Height | 60.0 cm |
| Package 3 Width | 80.0 cm |
| Package 3 Length | 448.0 cm |
| Package 3 Weight | 59.584 kg |
Description
This input kit is part of the Modicon STB range, an offer of modular distributed I/O. This standard digital input kit is an accessory kit for Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It includes a digital input module, an STB base, one spring clamp connector, and one screw type connector. Setting can be done via Advantys STB configuration software. It weighs 0.11kg. The kit includes STBXBA1000 base, STBDDI3420 module, STBXTS2100 6-terminal spring clamp connector, and STBXTS1100 6-terminal screw type connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a primary controller via a bus or communication network.
Lead time: in stock
Warranty: 12 months
100% Payment in Advance
Courier partners: DHL, UPS, FedEx
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging.
Related parts :
CompactCom B30
DeviceNet™ B30 Brick AB6381
Profibus DPV1 B30 Brick AB6380
EtherCAT B30 Brick AB6385
EtherNet/IP™ 2 Port B30 Brick AB6384
Modbus TCP 2 Port B30 Brick AB6383
PROFINET IO 2 Port B30 Brick AB6382
Anybus CompactCom M30 MODULE
Questions? Call/Whatsapp +86-18030186862 or email saleszxtech@163.com
We specialize in purchasing and selling quality pre-owned mechanical parts, PLCs, motors, panel views, electrical components and other industrial surplus inventory. We stock a wide variety of items ranging from small parts to complete machines. Whether you are interested in selling or buying, we make it our mission to help customers have a quick, hassle-free experience.
